Bag Filter Housing

The maximum operating pressure for a bag filter housing can vary depending on the specific model and manufacturer. Generally, most bag filter housings are designed to withstand pressures between 100-300 psi (pounds per square inch). However, some high-pressure applications may require housings with higher operating pressures.
When selecting a bag filter housing, it's important to consider the specific pressure requirements of your application and consult with the manufacturer or filtration expert to determine the appropriate housing for your needs. Additionally, it's important to ensure that the bag filter housing is properly installed and maintained to prevent leaks or damage that could lead to increased pressure or failure.

Top Entry Filter Housings: As the name suggests, top entry filter housings have a top opening where the filter bags are inserted into the housing. They are commonly used in applications where the filter bags need to be easily accessible for replacement or cleaning.
Bottom Entry Filter Housings: Bottom entry filter housings have a bottom opening where the filter bags are inserted into the housing. They are typically used in applications where the filter bags cannot be easily accessed for replacement or cleaning, and the housing must remain in place.
Side Entry Filter Housings: Side entry filter housings have open sides where the filter bags are inserted into the housing. They are commonly used in applications where the filter bags need to be easily accessible for replacement or cleaning, but the housing cannot accommodate a top or bottom entry opening.
Modular Filter Housings: Modular filter housings consist of multiple modules that can be combined to create a custom configuration based on the specific filtration needs of an application. They are commonly used in large-scale filtration systems where multiple streams of air need to be filtered simultaneously.
Compact Filter Housings: Compact filter housings are designed to be small and space-efficient, making them ideal for applications where space is limited. They typically have a top entry opening and are commonly used in residential and commercial settings.
Ductile Iron Filter Housings: Ductile iron filter housings are made from a cast iron material that is resistant to corrosion and wear, making them suitable for applications where exposure to harsh environments is a concern.

Clean or Replace Filter Bags: Regularly clean or replace the filter bags as needed to maintain the performance and longevity of the housing. Depending on the type of filter media, the bags may need to be removed and cleaned with a brush or vacuum, or they may need to be replaced entirely.
Monitor Flow Rate and Pressure Drop: Regularly monitor the flow rate and pressure drop across the bag filter housing to ensure that it is functioning correctly. If the flow rate or pressure drop exceeds the manufacturer's recommended limits, the housing may need to be adjusted or replaced.
Inspect Filter Bags for Clogs: Regularly inspect the filter bags for clogs or blockages. If the filter bags become clogged, the flow rate may decrease and the pressure drop may increase, which can affect the performance of the bag filter housing.
Check Drain Valve for Leaks: Regularly check the drain valve for leaks. A leaking drain valve can cause accumulation of fluid or air in the housing, which can affect the performance and longevity of the bag filter housing.
Perform Regular Maintenance: Regularly perform maintenance on the bag filter housing to ensure that it is functioning correctly. This may include cleaning the housing, replacing the filter bags, and checking the inlet and outlet connections for leaks.
Follow Manufacturer's Instructions: Follow the manufacturer's instructions for maintenance and operation of the bag filter housing. The manufacturer may provide specific recommendations for cleaning, replacing, or adjusting the bag filter housing.